Owner's Manual
CLIMATE
&
CONVENIENCE
CONTROLS
Lettsc,een
The Scosche Touch Screen Interface replaces the Factory climate, convenience and personalization
controls built into the Factory Ford Radio/Dash panel. This solution provides improved ergonomics
while adding touch screen capabilities unique
to
this system. Read the following sections
to
familiarize
yourself with the operating controls and settings.
FIGURE
2
1.
lime
Left
Screen
Layout
2. Outside temp reading
3. Driver Air Temp. Up (Warm)
4. Driver Air Temp. Reading
5.
Driver Air Temp Down (Cool)
6. Pass. Air Temp. Up (Warm)
7.
Pass. Air Temp. Reading
8. Pass. Air Temp. Up (Cool)
9.
NC
Directional Airflow
10. Airflow Speed Indicator
11 . Power
ON
/ OFF
12. Fan Speed
Down(·)
13. Fan Speed
Up(+)
14. Max
NC
ON/OFF
Time
~F
/
•c
v
•-
II+
MAXQ
Digitally displays time, enter Menu settings to configure time format {12HR/24HR). Tap the
displayed time on the screen
to
enable date window displaying for 3sec.
Convenient reading
of
outside temperature.
Enter menu settings
to
configure Celsius
or
Fahrenheit.
Use the UP and DOWN arrows (Fig. 2, #3,5,6, &
8)
on the color TFT touch screen to adjust
vehicle air temperature. Touch the Red <Up> arrow to increase
air
temp. Touch
the
Blue
<Down> arrow
to
decrease air temp. Temperature reading will display numeric temperature
selected, indicating the current temperature level. The temperature range is color-coded:
Red indicates warmer air and Blue indicates cooler air. Individually adjust
driver/
passenger
or
SYNC them (See Fig
3;
#1, Page 8)
Press the Power Button (Fig.2, #11)
to
toggle the climate controls On
or
Off
.
To
decrease fan speed, press the fan speed DOWN button (Fig. 2, #12). A graphic
level indicator will move down on the color TFT screen indicating the current fan speed
(Fig. 2, #10).
To
increase fan speed, press the fan speed UP button (Fig. 2, #13). A graphic
level indicator will move up on the color TFT screen indicating the current fan speed
(Fig. 2,
#1
O)
. There are a total
of
7 fan speed increments from off
to
maximum.
MAX
A/C button (Fig. 2, #14) on the color TFT touch screen to turn on Max A/C. Maximum
cooling will occur with the temperature is adjusted to lowest cold setting and the Fan speed is
set at maximum. MAX A/C is used to cool the car down as quickly as possible. Touch the Max
A/C button again
to
return to the previous Fan speed and temp setting.
AIR
FLOW/
VENT CONTROL (Figure 2)
Touch the vent control mode icons (Fig. 2, #9) on the color TFT touch screen to select vent mode.
Graphics are displayed according
to
the selected vent and airflow pattern. Refer to vehicles owner
manual for further details.
Air
is
directed
from the instrument
panel vent outlets.
Air is directed
From
the
floor
vent outlets
Air
is
directed
from the instrument
panel outlets and
the floor vent outlets.
© 2017 SCOSCHE INDUSTRIES, INC
7
Air is directed from
floor, defrost and si
de
window demist outlet
9
Indication
light
will
illuminate
on
right
screen
(See
Page
8)
.
Indication
light
will
illuminate
on
right
screen
(See
Page
8)
.
ITCCR01 B 07/17