Owner's Manual
CLIMATE
&
CONVENIENCE
CONTROLS
(RightScreenJ
FIGURE
3
Right
Screen
Layout
1
1. SYNC
2.
Air
Conditioning
3.
Front Defrost
4. Rear Derost
5. Recirculation
ON
/ OFF
6.
Scosche Logo
7.
AUTO
8.
Menu
9.
CTRL
Press the Sync button (Fig.3, #1) on the touchscreen
to
toggle the
Sync
feature On/Off.
SYNC
Sync
indicator light will illuminated when this feature
is
enabled.
Use
Sync
to
synchronize
the passenger temperature setting with the driver temperature setting. Changing
the
passenger temperature setting while in
Sync
will disable feature this feature
*
Press the
Air
Conditioning Button (Fig.
3,
#2) to
tum
the
Air
Conditioning
On
or
Off
. A light
will illuminate
in
the button indicating
the
on/off status
of
the A/C.
Press the Front Defrost (Fig. 3, #3) to
tum
Defrost
On
or
Off.
This
configuration helps
~
clear front windshield
of
fog
or
moisture.
Air
will be directed
to
the windshield. A light will
illuminate in
the
button indicating the on/off status
of
the Defrost mode. NOTE:
For
best
results clear the windows
of
snow
or
ice before defrost settings. DO
NOT
OPERATE
VEHICLE UNTIL WINDOWS ARE CLEAR!
(m]
Press the Rear window derost button (Fig. 3, #4)
to
turn
the
rear window defogger on
or
off
. A light will illuminate in
the
button indicating the on/off status
of
the Defrost mode.
Rear defogger will also
be
turned
off
by turning the ignition
to
the
OFF
position.
Press the recirculation button (Fig.
3,
#5)
to
turn on air recirculation. A light will illuminate
in
the
button indicating the on/off status
of
the Recirculate mode. Interior
air
will
be
re-
~
circulated inside the vehicle. This mode helps
to
quickly cool the
air
inside the vehicle
or
prevent outside
air
and odors from entering. Operating recirculation
mode
[while the A/C
is
off] increases humidity and may cause the windows
to
fog. Recirculation
is
not
available
in
the
Defrost
or
Defog modes.
~
Press the Scosche logo (Fig. 3, #6)
4x
to
enable Installer menu
under
the Configuration
Menu (pg.1 O, Fig. 5; #6).
--
...
Automatically controls the interior temperature
of
the vehicles interior by adjusting airflow
AUTO
distribution and amount. Performing this function will cause
the
system to switch between
manual mode and automatic modes (Fig. 3, #7).
MENU
allows the
user
to
configure Vehicle Settings (Installer
Menu)/
ITC
Settings/
MENU
Language settings. Within menu settings
the
user
can also refer
to
module version for
technical reference. Please refer
to
Charts on page
11
& 12 for further details.
CTRL
Press the
CTRL
(Controls) on the right touch screen to access vehicle control (See page
9 for
CTRL
screen details.)
© 2017 SCOSCHE INDUSTRIES, INC
8
ITCCR01 B 07 /17