Product Manual

ManualsBrandsScott Aerator ManualsDecorative FountainsSkyward Big Shot Fountain — 1 1/2 HP, 230 Volt, 100-Ft. Power Cord

We at Scott Aerator thank you for your purchase. It is our goal to ensure that you are completely

satised with your new Fountain and that it continues to operate smoothly for many years

to come. Please take a few moments to read through this document for proper assembly,

installation and maintenance to maximize the operating life of the unit.

This Kit Includes

1 - FLOAT PLATFORM

1 - PUMP ASSEMBLY

1 - STAINLESS STEEL FILTER

2 - 5/16"x2" STAINLESS STEEL BOLTS

2 - STAINLESS STEEL NUTS & WASHERS

3 - SELF TAPPING STAINLESS STEEL SCREWS

Tools Needed

ONE 3/8” WRENCH OR SOCKET DRIVER

TWO 1/2" WRENCHES (OR PLIERS)

Pond

Fountains

Shown with

Skyward

Nozzle

Summary of content (4 pages)

PAGE 1
Pond Fountains We at Scott Aerator thank you for your purchase. It is our goal to ensure that you are completely satisfied with your new Fountain and that it continues to operate smoothly for many years to come. Please take a few moments to read through this document for proper assembly, installation and maintenance to maximize the operating life of the unit.
PAGE 2
Assembly Instructions 1. Begin by placing the fountain housing on a solid surface, with the pump discharge opening facing up. 2. Tie nylon rope (not included) to the two stainless steel eyebolts. These will be the anchoring lines for the fountain. 3. Next, put the float in place and secure with the two 5/16" x 2" bolts, washers and nuts included. 4. Now, turn the fountain upside down, remove the styrofoam doughnut, and place the stainless steel filter in place.
PAGE 3
Maintaining your Pond Fountain Most of our products require very little to any maintenance. Under normal operating conditions, you should enjoy many years of trouble free service from the unit. Anchoring ropes, depending on type, will deteriorate over time. These should be replaced every five years if quality nylon rope (3/8” or thicker) is utilized. When the unit is removed from the water to replace anchoring ropes, it would be a good opportunity to wash the fountain down with high pressure water.
PAGE 4
The Scott Aerator Awesome Warranty All standard Scott Aerator products are unconditionally warranted for five years against motor defects in materials or workmanship, under normal operating conditions. All other product components are warranted for one year from date of purchase. Scott Aerator will repair or replace failed parts under warranty when the defective unit is returned to the factory, shipping prepaid, and factory inspection establishes that the part was defective.