Installation Guide

ASSEMBLY INSTRUCTIONS

Attach mounting plate (C) to outlet box (not

included) using the existing washers and outlet box

screws or the machine screws (BB). NOTE: If the

outlet box screws required for your outlet box are of

a different size than the machine screws (BB),

consult with a licensed electrician before

proceeding. Tighten machine screws (BB)

completely to secure mounting plate (C).

CAUTION: The fixture must be mounted to an

outlet box that is supported by the building structure.

Plastic outlet boxes are not recommended.

Hardware Used

Machine Screw

x 2

Remove mounting plate (C) from canopy (B) by

removing mounting plate screws (D) from the

edges of the canopy (B).

Save mounting plate screws (D) for later use.

Outlet

Box