Installation Guide

ASSEMBLY INSTRUCTIONS

Wrap electrical tape (not included) around each

individual wire connector (AA) down to the wire.

WARNING: Make sure no bare wire or wire

strands are visible after making connections.

Carefully arrange excess wiring and wire

connectors within canopy at top of fixture (A).

Align holes in edge of canopy (B) with holes at ends

of mounting plate (C). Re-insert the two mounting

plate screws (D) previously removed on Step 3,

page 5. Tighten mounting plate screws (D) securely.

Restore power and test fixture (A).

If light does not function, please refer to

TROUBLESHOOTING on the next page.

Outlet Box