Full Product Manual

TROUBLESHOOTING

Possible Cause

- Battery not making contact

- Lock off button not fully operated

- Battery not installed properly

- Battery not charged

Possible Solution

-Check battery is fully inserted

-Check that lock off button is fully forward prior to

moving trigger

-Check battery installation

-Check battery charging requirements

- Bar and chain running hot

and smoking

- Check tension for over-tight

condition

- Chain oil tank empty

- Chain installed backwards

- Adjust chain tension

- Fill tank with chain oil

- Reverse chain so that cutters face the right

direction

Call us first with questions about operating or maintaining your product

at 1.800.618.7474 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time,

or get assistance on scotts.americanlawnmower.com.

CALL US FIRST !!

- Chain tension too tight

- Check guide bar and chain for

damage

- Motor runs but chain is not

rotating

- Adjust chain tension

- Replace damaged bar and chain with identical

replacement parts.

Problem

- Unit does not run

- Motor stops while switch

trigger is depressed

- Motor is overloaded

- Release switch trigger, wait several seconds,

then depress trigger again.Motor should restart.

If it doesn’t, remove battery pack, reinstall

battery pack, then try again.

Model LCS31662S