iD85 IB_US version Size: 178 x 178 mm (16 pages) Printing color: Black Mat’l: 100gsm book paper Oct. 25, 10. Model iD85 The Home System For Your iPad® works with iHome + Sleep alarm clock app iHome + Radio internet radio app Note: iHome+Sleep and iHome+Radio apps are not covered in detail in this booklet. To learn more about how these apps can enhance your experience, please download the free iHome+Sleep app from the App Store and review the Start Guide. Questions? For latest instructions, visit www.
Table of Contents Quick Start ........................................................................................................................................................................1 Controls and Indicators / iD85 Display..........................................................................................................................3 Setting Up the iD85 ..................................................................................................................................
quick start 1: power 2: antennas snooze/dimmer set +/eq wakeup dtime RESET snooze/dimmer R ESET set +/- TEST eq T EST wakeup DC 7.5V DC 7.5V time set DST -1 time sync time zone am antenna time set DST -1 time sync time zone am antenna line-in +1 line-in +1 Snap AM antenna into provided stand, then plug antenna cable into socket on back of iD85. Move antenna 12” away. Extend FM antenna.
quick start 4: time sync Dock your iPad, iPhone or iPod (see step 3). Press and release the Time Sync Button located on back of the iD85. “TIME SYNC” will appear on the display, followed by “TIME UPDATED” upon successful syncing. 5: radio nap wakeup mode presets eq set +/snooze/dimmer Press the Mode Button as needed to select AM/FM band. Press the + or - Button to tune in a station. See page 7 for programming presets.
Controls and Indicators Top Panel Flexible 30 pin connector for iPad/iPhone/iPod Rubberized device rest Alarm 2 Button Play/Pause Button Alarm 1 Button Nap Button Volume + Button Set + Button Bedtime Button Wakeup Button nap wakeup bedtime mode Volume - Button presets eq Set - Button volume set +/- Alarm Reset/Power/App Settings Button EQ Button Presets Button Mode Button snooze/dimmer Snooze/Dimmer Button Rear Panel Time Set Button AC Adaptor Jack Time Sync Button Line-in Jack Tim
Setting Up the iD85 Updating your iD85 firmware For best performance, make sure to update the iD85 firmware. To do so, download the free iHome+Sleep app from the App Store. Launch the app, then go to Settings/iD85 and follow directions to update the firmware. Connect iD85 to Power Source Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120V AC wall socket. Adaptor must be plugged in to operate unit.
Using the iD85 Using the Alarms iD85 has a dual alarm system so you can set two separate alarms to different alarm times, wake-to sources and frequencies (daily, weekdays or weekend).Tip: Download the free iHome+Sleep app for advanced alarm, snooze and sleep functions Setting the Alarms 1. Press and hold the or Button until the alarm time flashes on the lower part of the display. Press the + or - Button to set the alarm time (hold for faster setting). Remember to set the correct AM or PM time. 2.
Using the iD85 Snooze Operation 1. To program a custom snooze time, press and hold the Snooze Button during normal operation (when alarm is not sounding) until the snooze minutes display appears. Press the + or - Button to set the snooze timer from 1 to 29 minutes. Press the Snooze/Dimmer Button to exit snooze setting mode. 2. Press the Snooze/Dimmer Button after an alarm sounds. The alarm will be silenced for the set snooze duration time then sound again.
Using the iD85 3. You can set up to 12 presets (6 AM, 6 FM).To memorize a station as a preset: A. Press the Mode Button to select the desired AM or FM band. B. Press the Preset Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then hold the Preset Button until the selected preset number begins flashing in the display. C. Press the + or - Button to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the next clear station. D.
Using the iD85 Nap Operation Nap mode lets you set an alarm separate from the Alarm 1 and Alarm 2 settings. The nap wake to source by default is the buzzer alarm, but if an iPad/iPhone/iPod is docked, that will act as the alarm source. If you are listening to the radio or aux-in source, it will be muted and the buzzer will sound at the selected wake time. 1. Press the Nap Button located on top of the unit as needed to adjust the nap timer for 5, 10, 15, 20, 30, 45, 60, 90 or 120 minutes or OFF. 2.
A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. 2. 3. 4. 5. 6. 7. 8. 9.
Troubleshooting Symptom iD85 does not turn on iD85 doesn’t respond Possible Problem Solution AC adaptor isn't plugged into a working wall socket or not plugged into the power supply jack on back of the unit Plug the AC adaptor into a working wall socket and plug the connector into the supply jack on the unit iD85 requires a reset If unit is plugged in and doesn't respond, try resetting the unit by following these steps: a) remove iPhone/iPod from dock b) unplug unit from power source c) remove back u
Troubleshooting Symptom Sound is distorted Possible Problem Solution Volume level is set too high Decrease the volume Sound source is distorted If the iPhone/iPod original sound source (MP3) is old or of poor quality, distortion and noise are easily noticed with high-power speakers. Try a different audio source such as a music CD. If you are using an external sound source like older generation of iPod or iPod Shuffle, try reducing the output volume on the device itself.
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.