iW2 Start Guide SCAN How-To Videos Visit our website for additional help and how-to videos www.ihomeaudio.
Overview Controls and Indicators TOP PANEL power power iPod and iTunes music controls AirPlay Wireless Audio mode (audio via iOS device or iTunes) Local iPod Audio mode volume (play audio via USB sync cable or aux-in) status LED status aux-in network setup 12V 3A REAR PANEL aux-in firmware status LED status aux-in AC power network setup Wi-Fi network setup 12V 3A USB Port (Sync, Charge, Play and firmware updates) ethernet (direct network connection) Wi-Fi network status LED
Step 1 - Getting Started What’s in the Box bass treble reset 9a Start Guide power adaptor remote USB sync cable iW2 Speaker Powering on the iW2 1 2 outlet 12V connect to power source press & hold power button (3 seconds) to power unit ON allow 20 seconds to allow system to startup Check list before proceeding to Step 2 To enjoy AirPlay wireless audio, you must have the following: - iTunes or an iOS device (iPod touch, iPhone, or iPad). - A functioning home network with Wi-Fi.
Step 2 - Network Setup for AirPlay Option A - Connecting with your iPod touch, iPhone, or iPad over Wi-Fi 1 2 3 Verify that the iW2 is powered on. Download our free iHome Connect app from the App Store and launch. Connect your iOS device to the iW2 using the included USB sync cable.
Option B - Connecting with your Mac or PC over Wi-Fi 1 Verify that the iW2 is powered on. 2 Press and hold (3 sec.) on the back of unit. 3 Network Setup button select the network called "iHome Setup ######" from Wi-Fi network settings on your Mac or PC. AirPort: On Turn AirPort Off iHome Setup ###### Your Wi-Fi network Another network Another network power status Currently connected to: YOUR Wi-Fi NETWORK Internet access iHome Setup ###### Join Other Nework... Create Network...
Option C - Connecting directly via Ethernet 1 Disconnect AC power cable. 2 Connect ethernet cable to the iW2 and router (or network). 3 Connect AC power cable and power ON iW2. 12V 12V directly connect to router or wall ethernet port press & hold power button (3 seconds) to power ON iW2 Note: Ethernet cable not included. To revert vert back to setup option A or B unplug ethernet cable and re-boot iW2. Success! 1.
Step 3 - Play AirPlay & iPod touch, iPhone, or iPad Using an iOS device: 1. Connect yyour iOS device to the same Wi-Fi network as iW2. Go to Settings --> Wi-Fi on your iOS device. 2. Tap on iPod/Music app, look for the AirPlay button next to the iPod music transport controls. 3. Tap on the AirPlay icon and choose iW2 from the list of speakers. If the iW2 speaker is not available, restart your iOS device and verify that the iW2 is powered on. 4. Press play.
Step 4 - Control AirPlay Wireless Audio Mode Enjoy AirPlay audio anywhere: 1. Press to exit standby mode and power the iW2 ON. 2. Press for wireless audio mode and listen to AirPlay music. 3. Use buttons on the iW2 or iW2 remote to control streaming AirPlay content. Local iPod Audio Mode Charge and Play iPod & iPhone using iPod USB sync cable: 1. Connect USB sync cable to iW2’s USB port. 2. Press Local audio mode button and enjoy iPod and iPhone charging and audio playback. 3.
Step 5 - Enhance Multi-room audio Add AirPlay-enabled speakers to any room iHome’s AirPlay solutions provide an affordable way to enjoy a truly wireless home audio experience anywhere you want; kitchen, bedroom, livingroom or patio. Apple Remote App Control iTunes playback anywhere in the house Download Apple’s Remote app free from the App Store to your iOS device and control your iTunes library and AirPlay speakers wirelessly when connected to the same Wi-Fi network.
Troubleshooting Problem Solution I am unable to connect the iW2 to my home Wi-Fi network. 1. Try using the free iHome Connect app. 2. Verify that your Wi-Fi network is functioning that the firmware of your router is up-to-date. 3. Verify that your router is discoverable. 4. Use Open or WPA/WPA2 Personal security settings (not WEP or Enterprise). 5. Make sure that the SSID name of your home router consists of normal characters or digits, with no space or special characters. 6.
works with iHome Connect Wi-Fi Network Setup app iHome Sleep FREE alarm clock app iHome Radio Internet radio app available on the App Store works with iW2 User Manual AirPlay wireless speaker system English www.ihomeaudio.
Welcome to the iHome iW2 Thank you for choosing iHome. The Air Series represents the new frontier of product offerings from iHome that embrace Wi-Fi connectivity and AirPlay, Apple’s new wireless streaming technology. The iHome iW2 with AirPlay offers the latest experience in home audio entertainment allowing users to stream digital audio over Wi-Fi from iTunes, iPad, iPhone and iPod touch. Featuring SRS TruBass DSP technology, the iW2 offers high fidelity audio with a versatile, space-saving design.
iW2 Overview Contents 1. iW2 speaker 2. Power adaptor 3. USB sync cable 4. Remote control 5. Document pack bass treble reset 9a iW2 Speaker power adaptor USB sync cable remote Start Guide (Document Pack) Compatibility USB connector works with: iPod touch (1st, 2nd, 3rd, and 4th generation), iPod nano (2nd, 3rd, 4th, 5th, and 6th generation), iPhone 4, iPhone 3GS, iPhone 3G, iPad, and iPad2.
iW2 Controls TOP PANEL power power iPod and iTunes music controls AirPlay Wireless mode (audio via iOS device or iTunes) Local iPod Audio mode volume (audio via USB sync cable or aux-in) REAR PANEL FRONT PANEL status LED Green when touching a button on remote Green, blinking when volume is muted status aux-in network setup 12V 3A REAR PANEL aux-in firmware button & status LED status aux-in AC power network setup Wi-Fi network setup 12V 3A USB Port Wi-Fi network status LED ethernet (S
Quick Start Power 1 2 Connect to power source Press & hold power button (3 seconds) to power unit ON. 3 2 Press repeatedly to cycle between standby and ON. Press & hold (3 seconds) to turn iW2 OFF outlet Note: When the iW2 is OFF (not in standby mode) you must press & hold to begin using your iW2 speaker.
Getting Started Master Power The iW2 has a master power mode control interface to power the unit ON or OFF, help conserve energy, and reboot the iW2 speaker. In order for the iW2 speaker to power ON, the unit must be connected to an AC outlet. Master Power ON - Press & hold Master Power OFF - Press & hold unit. Power Button (3 seconds) to boot-up and activate your iW2 speaker.
Using your iW2 Top panel controls The iW2 speaker has a backlit control interface for power, mode, volume, and music controls. Controls will be lit according to the status of the iW2 speaker and the selected mode. Note: Music transport controls will flash once to signal a proper press.
Network Setup for AirPlay Check list Please verify the following steps before attempting to connect your iW2 speaker to a Wi-Fi network: To enjoy AirPlay wireless audio, you must have the following: - iTunes 10.1 or later on a Mac or PC. - iPad, iPhone, or iPod touch with iOS 4.2 or later. - A functioning home network with Wi-Fi. Download the latest software updates for iTunes and your iOS device to ensure that you are able to enjoy the latest AirPlay enhancements and compatibility.
Wi-Fi Network Setup Option A - Connecting with your iPod touch, iPhone, or iPad (Recommended) If you have an iPod touch, iPhone, or iPad with iOS 4.0 or later, we recommend that you use our free iHome Connect app for the quickest Wi-Fi network setup experience. 1 To connect your iW2 speaker to a Wi-Fi network using an iOS device, follow these steps: 12V 1. Connect AC power and power ON iW2 speaker. 1. Connect your iOS device to the iW2 using the included iPod USB sync cable. 2.
Wi-Fi Network Setup continued... Option B - Connecting with your Mac or PC over Wi-Fi To connect your iW2 speaker to a Wi-Fi network using a Mac or PC, follow these steps: 1 12V 1. Connect AC power and power ON iW2 speaker. 2. Press and hold (5 sec.) unit. press & hold power button (3 seconds) to power ON iW2 Network Setup button on the back of Note: The Network Status LED will begin flashing green and the top control panel will also flash. 2 power status network setup 3.
Music Connectivity Connecting to the iW2 speaker You can connect to your iHome iW2 speaker four different ways: 1. Using AirPlay® to stream wirelessly from iTunes on your Mac or PC (iTunes can stream to multiple AirPlay speakers). 2. Using AirPlay® to stream wirelessly from your iPad, iPhone, and iPod touch (iOS devices stream to only one AirPlay speaker at a time). 3. Using the USB port on the rear panel with an iPod USB sync cable for audio and charging your iPad, iPhone, or iPod. 4.
Control SRS TruBass The iW2 features SRS TruBass® digital sound processing to enhance the audio performance and ensure proper bass response when listening to your music. The SRS TruBass function is on by default and can only be turned off or on with the IR remote by pressing the The Front Status LED will flash Green when the SRS TruBass effect is turned OFF or ON via the remote. SFX button. EQ The iW2 has an EQ feature that is controlled via the remote that adjusts Bass and Treble.
Troubleshooting Quick tips for problems with network setup: 1. Verify that your router is discoverable (must broadcast itself and not require user to type in the exact name). Verify that the firmware of your router is up-to-date. 2. Must use WPA/WPA2 security (not WEP, or WPA/WPA2 enterprise). 3. Try moving the iW2 closer to your access point (within 10-6 ft) during network setup. Sometimes multiple Wi-Fi networks are create interference. 4.
AirPlay & Network Setup Problems Solution I am unable to connect the iW2 to my home Wi-Fi network. 1. Verify that your Wi-Fi network is functioning and Wi-Fi certified. This device is only compatible with Wi-Fi certified routers. 2. Move the iW2 closer to your network access point; the Wi-Fi signal is weak or there are overlapping Wi-Fi signals or the iW2 is out of range of your Wi-Fi network. 3. Enable SSID broadcast (un-hide network) on the Wi-Fi router.
Problems Solution I’ve selected the iW2 speaker as my AirPlay audio source, but I do not hear any music. 1. Verify that the volume is not muted or set to 0. 2. Verify that there is not another iTunes library or iOS device connected to the iW2 speaker. 3. Try restarting iTunes or your iOS device. 4. Try restarting your iW2 by pressing and holding the power button for 3 seconds to turn the unit off. Wait for 10 seconds, then repeat to turn the unit back on. 5.
General Problems Solution The iW2 doesn’t respond or doesn’t turn ON. 1. Verify that the adaptor is connected and the power outlet is always ‘live’ (not controlled by a wall switch). 2. Reset the iW2 Hardware: - Unplug & reconnect the AC power cable from back of the iW2 speaker. - Press & hold power button (3 seconds) to turn the iW2 speaker on and wait 20 seconds for the unit to startup. No sound. 1. Verify that the volume is not muted or set to 0. 2. Verify the mode (AirPlay Wireless or iPod mode).
FAQ’s What is AirPlay? AirPlay is a wireless audio and video platform designed by Apple to stream digital media over a home network (Wi-Fi or Ethernet). AirPlay is built-in to iTunes and the iPad, iPhone, and iPod touch running the latest software. For AirPlay enabled speakers, this means: 1. Consumers can stream their iTunes music to our iW2 AirPlay enabled speaker, their Apple TV, or other AirPlay enabled speakers. 2.
Consumer Product Safety Guide Safety Instructions FCC Radiation Exposure Statement 1. FCC ID: EMOiW2. IC: 986B-iW2 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2.
Warranty Limited 1 Year Warranty Information iHome, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
• I AIR SERIES www.ihomeaudio.
Rz14 remote control instruction booklet
Unit Controls - - - iPhone/iPod Controls Power Button • Toggles unit between ON and Standby modes. Wireless Button • Activate wireless mode e iPod Button • Activate iPod mode Lower/Raise Volume • Raises or lowers volume of the unit Mute Button • Mute ON/OFF Plus/Minus Bass Buttons bass • Raises and lowers bass settings Plus/Minus Treble Buttons treble • Raises and lowers treble settings NOTE: this remote control will not power the iW2 ON from the OFF state.
SFX Button • Togg les special audio effects on the unit (Expanded bass, etc.) ON or OFF.
Replacing the Battery Your Rz14 remote control comes with one CR2032 battery installed. Remove the pu ll tab to use the remote. When the range of the remote seems reduced or if it ceases to work properly, it's time to replace the battery. 1. 2. 3. 4. Press point of a pin or paperclip firmly into the hole by the battery compartment cover on the rear of the remote control to release the cover. Slide battery compartment cover off (remove old battery if replacing).
To ensure your AirPlay device and your iHome work together, follow these 3 tips to avoid common problems: Wi-Fi Network General Issues 1. Verify that your router's firmware is up-to-date. 2. Older model Wi-Fi routers are not fully optimized to stream AirPlay content. Consider updating your Wi-Fi router if your having streaming issues to ensure the best AirPlay streaming experience. 3. Verify that your secured network is using WPA or WPA2 personal encryption.
Experience True Wireless Audio Introducing the iWl AirPia~ wireless audio system with rechargeable battery ~~~JI I I -a For more deto1ls. vis1! www.ihomeo~d~o com/ d1scover/o1rp1oy/ iP39 iA63 ......
iD85 iP90 M... b ~ iPod r.l iPhone iAlOO ........ 5} iPod !J iPhone O iPad aO N GIOVI l_~:.'s l ~ -- -• T• c• >•e•lfl The stereo clock radio for your iPhone/iPod. Ploy, charge, &woke/sleep to your iPhone/ iPod! Dual alarm, EQ function & radio presets. App-enhanced dual alarm clock radio for your iPod/iPhone/iPod with AM/FM presets. , =r= , Bluetooth® alarm clock with FM radio for iPod/iPhone/iPod. App-enhanced for wake, sleep, & internet radio.
iPl6 _,. ~ iPod IJ iPhone iP37 M•clefOt ~ iPod iD9 t:l iPhone Also available with built-in alarm dock as iP38 works with ;.1 iHome+Sieep fRE.E okum dod. opp P1 iHome+Radio l&J '"~~rr141t 1adf0 opp •D9S Portable stereo speakers with ala rm clock for iPhone®/iPod®. Charge, w ake & sleep to iPhone/iPod. Portable stereo speaker system for iPhone/iPod. Ploy & charge your iPhone/iPod in this ...-:-=-:-....,...,...,.,.,..., splosh resistant zippered case.
iDMl2 0 Bluetooth® Protect1ve speoker cover con be removed and used as on iPod/iPhone stand Portable rechargeable Bluetooth® stereo speakers for iPad/iPhone/iPod or any Bluetooth enabled device. iHM79 Portable multimedia speakers for your iPad, iPod, iPhone, laptop, and MP3 player. Includes bui lt-in rechargeable batteries and protective case.
Register by mail or online www.ihomeaudio.com/register • Confirmation of Ownership • Product Safety Notifications • Product Tips and Updates Thank you for choosing iHome. We hope to enhance your product ownership experience.
SDI Technologies Inc. Attn: Customer Service 135 Essex Avenue Avenel NJ,07001 First-Class Postage Required Post Office will not deliver without proper postage TBCO 1 • I PO BOX 174032 DENVER CO 80217-4032 11 •• 1.11 ••••• 1.1 ••• 111 ••• 1.1 •• 111 ••••• 11 ••• 1.1 •• 11 ••• 1.11 •• 1.
Register online today to enter the iHome quarterly giveaway 1. 1. 0 Mr. First Name 2. 0 Mrs. 3. 0 Ms. 4. 0 Miss Initial Last name TB CO 1 Street Apt. State/Province Zip/Postal code E-mail address: 2. I Your date of birth: 3. Marital status: Month 4. 5. Date of purchase: Month Day Name of store where purchased: 7. Did you: 01. 0 Purchase this product yourself? 02. 0 Receive this product as a gift? 9. Price paid (excluding sales tax): Model number: 13.
Important Safety Instructions 1. Water and Moisture- The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, 2. Ventilation- The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should swimming pool or in a wet basement. 3. 4. 5. 6. 7. 8. 9. 10. 11. not be situated on a bed, sofa, rug or similar surface that may block ventilation openings.
iW2- Consumer Product Safety Guide FCC Radiation Exposure Statement FCC ID: EMOIW2 IC: 986B-IW2 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-21 0 of the IC Rules; Operation is subject to the following two conditions: 1. This device may not cause interference and 2.
Garantie limitee de 1 an iHome Products, une division de SDI Technologie Inc. (Cia pres refere com me SDI Technologies), garantit ce produit contre tout defaut de main d'~uvre et de materiet en condition normale d'utillisation, pour une periode de 1 an a compter de Ia date d'achat. Si ce produit ne vous satisfait pas pleinement, il est preferable de le retourner au magasin ou vous l'avez achete.
Limited 1 Year Warranty Information iHome, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.