User manual

To power the iW2 speaker ON:
1. Plug AC adaptor cable into the iW2 speaker, and plug adaptor into a live AC wall outlet.
2. Press & hold the Power button (3 seconds) to power the unit ON.
Note: Allow 20 seconds for the speaker to startup before interacting with the iW2 speaker.
3. Press the Power button to switch between power ON and Standby mode.
The iW2 speaker will power ON to AirPlay mode.
6
English
Getting Started
Master Power
The iW2 has a master power mode control interface to power the unit ON or OFF, help conserve energy, and reboot the iW2 speaker. In
order for the iW2 speaker to power ON, the unit must be connected to an AC outlet.
Master Power ON - Press & hold Power Button (3 seconds) to boot-up and activate your iW2 speaker.
Master Power OFF - Press & hold Power Button (3 seconds) a second time to power the iW2 speaker OFF, conserve energy, and reset the
unit.
Note: If the iW2 is in the Master Power OFF state the iW2 will not support iPad/iPod/iPhone charging, remote control commands, AirPlay,
network setup, nor firmware updates.
Powering your iW2 speaker ON
Just like your computer, it is sometimes necessary to reset the iW2 speaker to make sure the unit is working properly. To reset and reboot the
iW2 speaker:
1. Unplug AC adaptor and wait for 10 seconds then reconnect AC adaptor to the iW2 speaker.
2. Press & hold the Power button (3 seconds) to power the unit ON.
Note: Allow 20 seconds for the speaker to startup before interacting with the iW2 speaker. The iW2 will store your network settings and
automatically reconnect to your network if it is detected after being reset or unplugged from AC power.
Resetting your iW2 speaker
outlet
1 2
allow 20 seconds to allow system to startup
12V