Installation Sheet

Installation Instructions for

Perrywood Outdoor Post

1.0

990 8214203-PWDOP

POST

8214203

GP I :ENERAL RODUCT NFORMATION

This product is safety listed for wet locations.

Incandescent version may be dimmed with a standard incandescent

dimmer. version may be dimmed with a dimmer. ConsultLED LED

lamp manufacturer for additional information.

This instruction shows a typical installation.

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

7400 Linder Ave, Skokie, 160077IL

800.969.3347

www.generationlighting.com

The "Generation Lighting" graphic is a registered trademark of

Generation Lighting. Generation Lighting reserves the right to

change specifications for product improvements without notification.

SAVE THESE INSTRUCTIONS!

PAGE 1
Installation Instructions for 990OP8214203-PWD Perrywood Outdoor Post 8214203 1.0 CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. POST Use minimum 90°c supply conductors. GENERAL PRODUCT INFORMATION: This product is safety listed for wet locations. Incandescent version may be dimmed with a standard incandescent dimmer.
PAGE 2
Install the Fixture 1A WASHER & CAP NUT 8 8 COVER THUMB SCREW 7 7 GLASS CAGE LAMP 6 CANDLE TUBE 5 LAMP 3 2 1 POST 1 Connect the fixture to a suitable ground in accordance to local electrical codes. 2 Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut. 3 Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut. 4 Secure the fixture to the post with post screws.