Installation Guide

2
1A
Secure the mounting plate to the junction box.
Connect the fixture ground wire to a suitable ground with accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the threaded nipple, and secure it in place by screwing the knurled nut onto the nipple.
Screw the coupler onto the threaded nipple, then screw the threaded pipe onto the coupler.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
Place the shade, rubber washer, and steel washer onto the threaded pipe, then secure them in place by screwing the hex
nut onto the pipe.
Place the cup onto the threaded pipe and secure it in place by screwing the finial onto the pipe.
1
2
3
4
5
6
7
JUNCTION BOX
Install the Fixture
THREADED NIPPLE
MOUNTING PLATE
FIXTURE BASE
SHADE
SOCKET
3
4
7
6
8
9
COUPLER
KNURLED NUT
THREADED PIPE
STEEL WASHER
FINIAL
CUP
HEX NUT
9
8
LAMP
RUBBER WASHER
5