Instructions / Assembly

LIFESTYLE & WELLNESS ®
Page 1
of 2
June 2022
INSTALLATION INSTRUCTIONS
Bridgeport Tub Seat
LIFESTYLE & WELLNESS ®
This seat should be installed as an assembled unit.
PLEASE READ THESE INSTALLATION INSTRUCTIONS THOROUGHLY PRIOR TO INSTALLING THE SEAT TO IDENTIFY THE TOOLS
RECOMMENDED FOR INSTALLATION, AS WELL AS THE MOUNTING HARDWARE REQUIRED TO COMPLETE THE INSTALLATION.
IMPORTANT: THIS PRODUCT SHOULD ONLY BE INSTALLED BY QUALIFIED AND TRAINED PERSONNEL
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD LEAD TO IMPROPER INSTALLATION OF THE TUB SEAT, STRUCTURAL
AND/OR WATER DAMAGE TO THE WALL AND IN-WALL SUPPORT STRUCTURES, AND/OR SERIOUS BODILY INJURY IN USE.
IN ADDITION, ALL WARRANTIES, EXPRESS OR IMPLIED, WILL BE NULL & VOID DUE TO IMPROPER INSTALLATION OF THIS
PRODUCT. THE MANUFACTURER DOES NOT ASSUME ANY LIABILITY FOR DAMAGE RESULTING FROM SERVICES
PERFORMED BY OTHERS, OR FAULTY INSTALLATION, MISUSE OR MISAPPLICATION OF GOODS.
MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT SHALL NOT EXCEED 250 LBS. WHEN PROPERLY INSTALLED.
1. Remove the Bridgeport Tub Seat and four (4) Positioning Stops (packed separately)
from the shipping carton.
Attach all four (4) Positioning Stops to bottom of seat by screwing them onto the exposed studs in a clock-wise
direction. Leave Positioning Stops loose enough to slide freely along the length of the slot in the frame.
Top View Bottom View
STSA-270155-PHENOLIC-SERIES
STSB-300150-Natural Teak Wood Series