User Manual

Constellation.2 SAS Product Manual, Rev. K 9
2.1.2 Electromagnetic compliance
Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-
Tick Marking. The drive was tested in a representative system for typical applications and comply with the Electromag-
netic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. The selected system represents the
most popular characteristics for test platforms. The system configurations include:
• Typical current use microprocessor
•Keyboard
• Monitor/display
•Printer
•Mouse
Although the test system with this Seagate model complies with the directives/standards, we cannot guarantee that
all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance and provide
the appropriate marking for their product.
Electromagnetic compliance for the European Union
If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic Compati-
bility Directive 2004/108/EC as put into place on 20 July 2007.
Australian C-Tick
If this model has the C-Tick Marking it complies with the Australia/New Zealand Standard AS/NZ CISPR22 and meets
the Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Spectrum Management Agency
(SMA).
Korean KCC
If these drives have the Korean Communications Commission (KCC) logo, they comply with KN22, KN 24, and
KN61000.
Taiwanese BSMI
If this model has the Taiwanese certification mark then it complies with Chinese National Standard, CNS13438.