User Manual

Constellation.2 SAS Product Manual, Rev. K 26
5.2.6.2.5 Abort
There are several ways to abort a diagnostic. You can use a SCSI Bus Reset or a Bus Device Reset message to abort the
diagnostic.
You can abort a DST executing in background mode by using the abort code in the DST Function Code field. This will
cause a 01 (self-test aborted by the application client) code to appear in the self-test results values log. All other abort
mechanisms will be reported as a 02 (self-test routine was interrupted by a reset condition).
5.2.7 Product warranty
See “Seagate® Technology Support Services” on page 6 for warranty contact information.
Shipping
When transporting or shipping a drive, use only a Seagate-approved container. Keep your original box. Seagate
approved containers are easily identified by the Seagate Approved Package label. Shipping a drive in a non-approved
container voids the drive warranty.
Seagate repair centers may refuse receipt of components improperly packaged or obviously damaged in transit. Con-
tact your authorized Seagate distributor to purchase additional boxes. Seagate recommends shipping by an air-ride
carrier experienced in handling computer equipment.
Storage
Maximum storage periods are 180 days within original unopened Seagate shipping package or 60 days unpackaged
within the defined non-operating limits (refer to environmental section in this manual). Storage can be extended to1
year packaged or unpackaged under optimal environmental conditions (25°C, <40% relative humidity non-condens-
ing, and non-corrosive environment). During any storage period the drive non-operational temperature, humidity,
wet bulb, atmospheric conditions, shock, vibration, magnetic and electrical field specifications should be followed.
Product repair and return information
Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanc-
tion any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty.