User guide

5
SeaLand 9300-9400 Series RushFlush Toilets Intended use
5 Specifications
5.1 Materials
Toilet: vitreous ceramic
Control module housing: ABS
Discharge outlet: high-tech polymer
Discharge floor flange: ABS
Flush switch panel frame: ABS
Flush switch panel: polycarbonate resin
Flush handle: plated brass (on applicable toilet
models)
4 Components
Basic system diagram* (g.
2
, page 2)
Ref. Description
A RushFlush toilet
B “Full tank” status panel (9300 only)
C Flush switch and status panel
(9400 only)
D Rim water supply line
E Lower bowl water supply line
F Check valve
G Blackwater holding tank
H High-ow electric water valve
I Maintenance valve
J Potable water pressure tank
K Check valve
L Fresh water to other xtures
M Pressure gauge
N High-ow water pump
O Pump inlet strainer
P Freshwater holding tank
* Recommended system conguration. Not all
components may be used in your RushFlush toilet
system.
Ref. Description
1 Flush handle (9300 series)
2 Flush handle switch
3 Anti-siphon valve
4 Vacuum breaker
5 Water ow control module
6 Water supply, upper rim
7 Lower bowl water supply inlet
(attached to supply line, not included)
8 Water valve, upper rim
9 Discharge loop
10 Discharge outlet
11 Sealing grommet
12 Discharge oor ange
Refer to complete parts list (packed separately) for
additional information.
Toilet diagram (g.
3
, page 2)