User guide
6
Specifications SeaLand 9300-9400 Series RushFlush Toilets
5.4 Dimensions
(g.
4
, page 2) All dimensions may vary ±3/8 inch (10 mm)
5.3 Minimum System Requirements
5.2 Approvals
• EMC Directive 2004/108/EC
• CE compliant components
Electrical
Power draw
1.2 amps @ 12 V DC
0.6 amps @ 24 V DC
Circuit breaker/fuse
recommended size
2 amps @ 12 V DC
1 amp @ 24 V DC
Water Supply
Upper rim 0.5 in. NPT inlet, water valve
Lower bowl jet 1 in. NPT inlet, water valve
Flow rate 15 gpm/57 lpm @ 30-50 PSI / 207-345 kPa
Discharge
Inside diameter 1.5 in./38 mm pipe or 1.875 in./47 mm hose
Horizontal run gravity drain *
Required components
Water pump ** 15 gpm/57 lpm
Potable water pressure tank ** 150 PSI working pressure rating
Electric ush switch Dometic
* Horizontal discharge plumbing must drop a minimum of 0.125 in./3 mm for every 1 ft./30.5 cm of horizontal run.
** Purchased separately. Water pump may be part of vessel’s potable water system.
Specications subject to change without notice.
Model 9431, 9441 (with flush switch)Model 9331, 9341 (with flush handle)
Ref. Dimension
A 19 in. / 483 mm
B 14 in. / 356 mm
C 21.5 in. / 546 mm
D 17.5 in. / 445 mm - seat height
E 17 in. / 432 mm
F 10.5 in. / 267 mm - centerline rough-in
G 33.5 in. / 851 mm - seat lid up
Ref. Dimension
A 19 in. / 483 mm
B 16.5 in. / 419 mm*
C 21.5 in. / 546 mm
D 17.5 in. / 445 mm - seat height
E 17 in. / 432 mm
F 10.5 in. / 267 mm - centerline rough-in
G 33.5 in. / 851 mm - seat lid up
* width measurement includes flush handle