Operation Manual

About Sea and Snorkel Modes >>

To set the color correction (White Balance):

1. Press the

MENU button.

2. Select [White Balance] with the

 /  buttons and press the SET button.

3. Select between BluWtr<25ft, BluWtr>25ft, GrnWtr<25ft or GrnWtr>25ft

with the

 /  buttons depending on your type of water conditions and

press

SET.



The default setting for Sea mode is “BluWtr>25ft”. The default setting

for Snorkel mode is “BluWtr<25ft”.



When the camera is in Sea and Snorkel modes, the scene displayed on

the LCD display will appear red in color when you are on land. This is

normal and will appear different when you are underwater.



The Sea mode color correction feature will not work during night time

diving or depths greater than 50ft / 15m depending on the amount of

available light.



For best UW pictures, keep the camera’s flash OFF when in Sea or

Snorkel mode. If light conditions are too dark, we recommend using the

SeaLife Digital Pro Flash (item SL961 - optional accessory).

NOTE