Operation Manual

Menu Options >>
45
Metering
This sets the metering method for calculating the exposure.
* [
] Average: Averages the light metered from the entire frame, but gives
greater weight to the subject matter at the center.
* [
] Spot: A very small portion of the center of the screen is measured
to calculate the correct exposure.
* [
] Multi: The entire area of the screen is measured, and the exposure
is calculated.
Capture Mode
This sets the recording method at the time of capturing images.
* [
] Single: Captures one image at a time.
* [
] Continuous: Permits continuous capture of up to 3 images.
* [
] Auto Exposure Bracketing: Permits 3 consecutive images in the
order of standard exposure, underexposure and overexposure
compensation.
* [
] SPY: For continuous pictures at set time intervals. (See page 26)
* [
] Cont.flash: The “Series + flash” capture mode lets you shoot a
sequence of 3 pictures with flash.
* [
] Burst: Permits continuous photography while keeping the shutter
button pressed down. As long as you hold the shutter button
pressed, pictures are captured until the memory capacity is
exhausted.
* [
] Pre-Shot: Pre-shot helps you get the background you want, even if
you need to ask someone else to record the image for you. Basically,
Pre-shot is a two-step process.
* [ ] Coupl.shot: This mode lets you record images of two people and
combine them into a single image. This makes it possible for you
to include yourself in group images, even when there is no one else
around to record the image for you.
* [
] Album Shot: Creates an album-like layout to combine 3 shots into
a single image.
 In [Continuous], [AEB], [Burst], [Cont.flash], [Pre-Shot], [Coupl.shot] and
[Album Shot] capture mode, the [Voice Memo] is automatically fixed at
[Off].
NOTE