Specifications

18
• Fan speed sensors, which monitor the fan 1 and fan 2 connectors (see motherboard
layout for the location of these connectors).
• Power supply voltage monitoring to detect levels above or below acceptable values.
When suggested ratings for temperature, fan speed, or voltage are exceeded, an
interrupt is activated. The hardware monitor component connects to the SMBUS.
Onboard LAN (Optional)
The optional onboard LAN for the Gatineau motherboard is driven by the Intel 82559
chipset. The Intel82559 is a 10/100 MBps PCI Ethernet LAN Controller. It automatically
detects between 10 Base-T or 100 Base-TX Fast Ethernet connections. This function is
a manufacturing option, if it is not installed the JP3 jumper will also NOT be installed.
The LAN LEDs which are mounted next to the LAN connector indicate the following:
Yellow LED (Speed) On status indicates a 100 MBps connection.
Off status indicates a 10 MBps connection.
Green LED (ACT/LINK) Indicates there is activity on the LAN.
Indicates if the LAN cable is connected (linked).
Remote reset capabilities are possible from a remote peer or server using the LANDesk
Client Manager and service layers (when available)
Onboard Sound (Optional)
The onboard sound is powered by the Creative Ensoniq AudioPCI ES1373 chipset. For
music playback, the Ensoniq synthesis engine provides 32 voices of great wave-table
sounds. Now the instruments sound just like their real life counterparts, not a poor
facsimile. Utilizing the PCI bus, the Ensoniq AudioPCI uses far less CPU overhead than
traditional sound cards. This equates to better performance in multimedia titles and
terrific audio quality with very little processor usage.
It supports three rear jacks and three connectors on the motherboard. Refer to the
layout diagram for the location of each one.
Rear jacks:
Line-in
Line-out
Microphone
Joystick/MIDI connector
Motherboard connectors:
CD audio input – J29 (green connector)