Specifications

19
Wake On LAN Header (WOL)
The WOL header is used to implement the Wake on LAN feature when the onboard
LAN is not installed. Connect this header to a PCI LAN adapter that supports the Wake
on LAN feature. The adapter monitors network traffic. When the adapter detects a
‘Magic Packet’, it asserts a signal through the Wake on LAN header to wake up the
computer. This signal can wake up the computer only when the AC power cord is still
plugged into the wall socket and the computer is turned off using the Standby Power
button.
Note: WOL requires an ATX power supply that can supply 720 mA current at the
5V standby output.
Front Panel Connector
PWR ON Pins 1 & 2, connected to Standby Power On/Off Switch via twisted
pair cable.
SLEEP Pins 3 & 4, connected to Sleep Switch via twisted pair cable
(orange/white).
INFRARED Pins 6-11, not currently used.
HD LED Pins 15 & 16, connected to the HDD LED via twisted pair cable
(red/white).
PWR LED Pins 18 & 20, connected to the Power LED via twisted pair cable
(white/green respectively).
RESET Pins 22 & 23, connected to Reset Switch via twisted pair cable
(orange/white).
SPEAKER Pins 24, & 27, connected to the case speaker via twisted pair cable
(red/black).
CD Audio in Connector
The CD audio in connector, J29, is connected to the audio output of the CD-ROM.
1
27
PWR ON SLP INFRARED HDD LED PWR LED RST SPEAKER
10 20