Specifications

100 MHz bus:

JP3 JP4 JP5 JP6

350 MHz ON OFF OFF ON

400 MHz OFF ON ON ON

450 MHz OFF ON OFF ON

500 MHz OFF OFF ON ON

550 MHz OFF OFF OFF ON

Onboard LAN Power Supply Voltage Source – JP8:

JP8

3.3V 1-2

Standby 3.3V 2-3*

Clear CMOS – JP9:

JP9

Normal 1-2*

Clear CMOS 2-3

To clear the CMOS do the following:

• Power down the system.

• Remove the system cover to access the motherboard.

• Change the setting of JP9 to 2-3 (see the motherboard layout for it’s location).

• Turn on the system, wait until you see video and turn the system off again.

• Change the setting of JP9 back to 1-2 (the default).

• Replace the system cover.

• Turn on the system and change the BIOS settings according to your preferences.

Clear Password – JP10:

JP10

Normal 1-2*

Clear Password 2-3