Specifications

24
To clear the password, do the following:
• Power down the system.
• Remove the system cover to access the motherboard.
• Change the setting of JP10 to 2-3 (see the motherboard layout for it’s location).
• Turn on the system, wait until you see video and turn the system off again.
• Change the setting of JP10 back to 1-2 (the default).
• Replace the system cover.
Flash Device Mode Settings – JP2 and JP1:
JP2 JP1
Program Device 1-2* 1-2*
Write Protect 2-3 2-3
* = Default setting