Specifications

32
Standard CMOS Setup
Date (mm : dd : yy) : Wed, Mar 31 1999
Time (hh : mm : ss) : 13 : 1 : 28
HARD DISKS TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Primary Master : Auto 0 0 0 0 0 0 Auto
Primary Slave : Auto 0 0 0 0 0 0 Auto
Secondary Master : Auto 0 0 0 0 0 0 Auto
Secondary Slave : Auto 0 0 0 0 0 0 Auto
Drive A : 1.44M, 3.5 in.
Drive B : None
Video : EGA/VGA
Halt On : All, But Keyboard
Base Memory : 640K
Extended Memory : 64512K
Other Memory : 384K
Total Memory : 65536K
ESC : Quit ↑↓→← : Select Item PU/PD/+/- : Modify
F1 : Help (Shift) F2:Change Color
This section describes the Setup options found on the Standard CMOS Setup menu. It
is used to set the time and date and to configure the disk drives. If you select certain
options from the main screen (e.g., Primary IDE Master), the Setup program switches to
a sub-screen for the selected option.
Date / Time
Select the Date/Time option to change the date or time. The current date and time are
displayed. Enter new values through the displayed window.
Floppy Drive A, B
Choose the Floppy Drive A or B option to specify the floppy drive type. The settings are
360 KB 5.25-inch; 1.2 MB 5.25-inch; 720 KB 3.5-inch; 1.44 MB 3.5-inch; and 2.88 MB,
3.5-inch. The default is 1.44 MB, 3.5-inch.
Primary Master, Primary Slave, Secondary Master, Secondary Slave
Choose these options to configure the hard disk drive shown in the field. When you
select an option, the following parameters are listed: Type, LBA/Large Mode, Block