Specifications

40
AGP Aperture Size (MB)
Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is a
portion of the PCI memory address range dedicated for graphics memory address
space. Host cycles that hit the aperture range are forwarded to the AGP without any
translation. See www.agpforum.org for APG information.
Power Management Setup
Power Management : User Define
PM Control By APM : Yes
Video Off Method : PPMS
Video Off After : Standby
Doze Mode : Disable
Standby Mode : Disable
Suspend Mode : Disable
HDD Power Down : Disable
Throttle Duty Cycle : 62.5%
PCI/VGA Act-Monitor : Disabled
Soft-Off by PWR-BTTN : Instant-Off
PWRON After PWR-Fail: Former-Sts
** Reload Global Timer Events **
IRQ [3-7,9-15], NMI : Disabled
Primary IDE 0 : Disabled
Primary IDE 1 : Disabled
Secondary IDE 0 : Disabled
Secondary IDE 1 : Disabled
Floppy Disk : Disabled
Serial Port : Enabled
Parallel Port : Disabled
Power on by Ring : Disabled
Wake Up On LAN : Enabled
IRQ 8 Break Suspend : Disabled
ESC : Quit ↑↓→← : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
This section describes the options available in the Power Management Setup menu
used to configure the power conservation features. If you select certain options the
setup program switches to a sub-screen for the selected option.
Power Management
This option allows you to select the type (or degree) of power saving for Doze, Standby,
and Suspend modes.
This table describes each power management mode:
Max Saving Maximum power savings. Only Available for SL CPUs.