Specifications

41
User Define Set each mode individually.
Min Saving Minimum power savings.
PM Control by APM
If Advanced Power Management (APM) is installed on your system, selecting Yes gives
better power savings.
Video Off Method
Determines the manner in which the monitor is blanked.
V/H SYNC+Blank System turns off vertical and horizontal synchronization ports
and writes blanks to the video buffer.
DPMS Support Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video
Electronics Standards Association (VESA). Use the software
supplied for your video subsystem to select video power
management values.
Blank Screen System only writes blanks to the video buffer.
Video Off After
As the system moves from lesser to greater power-saving modes, select the mode in
which you want the monitor to blank.
Doze Mode
After the selected period of system inactivity, the CPU clock runs at slower speed while
all other devices still operate at full speed.
Standby Mode
After the selected period of system inactivity, the CPU clock stops, the hard drive enters
an idle state, and the L2 cache enters a power-save mode. All other devices still
operate at full speed.
Standby Mode
After the selected period of system inactivity, the fixed disk drive and the video shut off
while all other devices still operate at full speed.
Suspend Mode
After the selected period of system inactivity, all devices except the CPU shut off.