Specifications

REFRIGERATOR INSTALLATION

Replacing Refrigerator Door:

❿ Right Door

• Lower the door onto middle hinge pin (9).

• Fit top hinge (7) over hinge lever latch (8) and into place. Insert hinge lever (6) under lever latch. Rotate lever

counterclockwise to secure hinge.

• Install the grounding screw (5) and connect wire harnesses (4).

• Hook tab on door switch side of cover under edge of wire opening in cabinet top. Position cover (2) into place. lnsert and

tighten cover screw (1).

❿ Left Door

• Lower the door onto middle hinge pin (9).

• Fit top hinge (7) over hinge lever latch (8) and into place. Insert hinge lever (6) under lever latch. Rotate lever clockwise

to secure hinge.

• Install the grounding screw (5) and connect the three wire harnesses (4).

• Push the water supply tube into the hole on the top case and pull it out on the backplate.

• Insert the water supply tube (3) into the connector tube until you see only one scale mark. (Fully insert the tube over

5/8”(15mm)).

• Hook tab on door switch side of cover (2) under edge of wire opening in cabinet top. Position cover into place. Insert and

tighten cover screw (1).

Correct

Incorrect