Owner`s manual

SECTION3. LEARNTHESTITCHES
Sewina Zipper
Fabric Preparation:
Put the right sides of the fabric to-
gether and sew to the end of the zip-
per opening. Use the reverse to lock
the stitches.
Sew the zipper opemng with stitch
length at "4" and top thread tension
at "3".
End ot opening
Right side
of fabric
Top edge of tabrtc
Set the Machine
Stitch Stitch selector
I
Top thread tension Stitch length
control 3 to 6 control 2
Zipper foot
<
To Saw:
1.
2,
3.
Z{pperteeth
Zipper tape
Fold back the |eft seam allowance
as shown.
Turn under the right seam allow-
ance to form a I/8" fold.
Place the zipper teeth next to the
118" fold and pin in place.
4. To sew the left side of the zipper,
set the zipper foot on the 1.eft side
of the needle.
5. Lower the zipper foot on the right
side at the bottom of the zipper
so that the needle p_erces the fold
and the zipper tape.
6. Sew through the fold and the zip-
per tape to the point where the
slider begins,
7. Lower the needle to hold the fab-
ric and raise the presser foot.
30