Owner`s manual

SECTION 5. CARE FOR YOUR MACHINE
Replacing the Light Bulb Cleaning the Machine
t, Unplug the machine and open the
face cover.
CAUTION!
The light bulb will be
HOT. Protect your
fingers when you
handle it.
2.
3,
Push the bulb up and turn the
bulb counter-clockwise to remove
it.
Put the new bulb in by pushing it
up and turning it clockwise.
To insure that your machine operates at its best, you need to keep the essential parts clean at all times.
The feed dogs and shuttle race areas can attract dust and lint. Your machine can become slugglsh or knock _oudly if a thread
is caught.
Check and clean those areas about every three months under normal use.
If you sew frequently, clean more often.
Clean the Feed Dogs
\
Follow these directions:
,, J
Unplug the machine. Remove
presser foot and needle.
Using a screw driver, remove
needle plate.
2. Use a lint brush and clean the feed
dogs,
3, Replace needle plate intoposition.
36