Owner`s manual

SETTING UP YOUR MACHINE
1, You'll find the spool pin on the top
cover,
Pull up the spool pin,
2o Plug foot control into machine
receptacle, Then connect cord into
any 1 !0 _ 120 volt A,C, wall outlet,
3. Your Kenmore sewing machine has
been thoroughly oiled at the factory,
Be sure to wipe off the needle plate
area, bed plate and shuttle carefully
before sewing a garment it is wfse to
practice on a scrap of fabric so any
surplus oil is absorbed.
Spoof pfrl@
STITCH SELECTOR
There are certain types of stitches that are used
more often than others in your garment con-
struction, Because of their frequent use, you will
soon realize the convenience offered to you by Stitch Selector
th_s control The des{red stitch w{_l be obtained
by turning the Stitch Selector,
All stitches printed in yellow on the indicator _ ".-. _3 c',=
panel must be sewn with Stitch Length Control iJ'_f
set at _' Stretch position, _1 _:3t "
735813003