Owner`s manual

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Set Up the Machine
• Plug inthe MachineandSwitchon the Power
NOTE:
Power supply pIug
Machine
plug
................... 4
Before inserting the plug into your
machine, be sure the power switch ts
OFF,
Check your outtetto be sure it is a 110to120
Volt AC outlet,
2. Insert the machine plug into the three-prong
plug connector, as shown, tt will only fit one
way.
3. insert the power supply plug into the outfet.
light
4,
Power switch
Push the light and power switch to turn
on the power and sewing light.
SAFETY FEATURE:
Your machine will not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
llght/power switch to prevent injury to
children.
Foot Control Use
!
Foot contro_
The foot control regulates the speed at
which you sew.
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres-
sure slightly.
NOTE: The foot control is sensltive and
wilt increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.