Elliptical Trainer User Manual

BEFORE YOU BEGIN

Thank you for selecting the innovative SEARS

LIFESTYLEFP CARDIO FORCE. The CARDIO FORCE

offers a unique form of low-impact exercise that uses

both the upper body and the lower body for increased

cardiovascular benefits and greater toning results.

For your benefit, read this manual carefully before

you use the CARDIO FORCE. If you have additional

questions, please call our toll-free HELPLINE at

1-800-736-6879, Monday through Saturday, 7 a.m.

until 7 p.m. Central Time (excluding holidays). To help

us assist you, please note the product model number

and serial number when calling. The model number is

831.287420. The serial number can be found on a

decal attached to the CARDIO FORCE (see the front

cover of this manual).

ASSEMBLY

Place all parts of the CARDIO FORCE in a cleared

area and remove the packing materials. Do not dis-

pose of the packing matedals until assembly is com-

pleted. Read each step carefully before beginning.

THE FOLLOWING TOOLS (NOT INCLUDED) ARE

REQUIRED FOR ASSEMBLY:

• one phillips screwdriver

• one adjustable wrench

• one rubber mallet

• the included pedal tool (see the drawing below).

PART CHART

Use the drawings below to identify the small parts

used in assembly. The number in parenthesis below

each drawing refers to the key number of the part. The

second number indicates the quantity needed for

assembly. Note: Some small parts may have been pre-

attached for shipping purposes. If a part is not found in

the parts bag, check to see if it has been pre-attached.

3/4" x 2" Pedal Tool--1

1/2" Push Nut (30).--2

Note: Extra Push Nuts

may have been included.

3/8" x 2 7/8" Carriage Bolt (35)--4

1/2" Dome Cap (29)--4

Note: One extra Dome Cap

may have been included.

#6 x 3/8" Screw (16)--2

3/8" Nylon Locknut (33)---4 1/4" x 2" Screw (17).--2