Installation & Assembly

1 2

FLOOR & TABLE LAMP

ASSEMBLY INSTRUCTIONS

SEE REVERSE FOR CHARGING INSTRUCTIONS

x 1

x 9

U.S. AND INTERNATIONAL PATENTS PENDING

IF ADDED WEIGHT IS DESIRED FILL WITH SAND WITH FUNNEL

THROUGH HOLE ON TOP OF BASE BEFORE ASSEMBLY

INDA ASSEMBLY INSTRUCTIONS 150129V1LAR

PAGE 1
FLOOR & TABLE LAMP ASSEMBLY INSTRUCTIONS SEE REVERSE FOR CHARGING INSTRUCTIONS x1 x9 x9 1 2 4 IF ADDED WEIGHT IS DESIRED FILL WITH SAND WITH FUNNEL THROUGH HOLE ON TOP OF BASE BEFORE ASSEMBLY INDA ASSEMBLY INSTRUCTIONS 150129V1LAR 3 5 U.S.
PAGE 2
CHARGING INSTRUCTIONS: 1. Place the charging induction plate in a dry, indoor location - DO NOT operate or leave the charging induction plate outdoors 2. Connect the plug to an electrical wall outlet with an input voltage of AC 100V-240V 3. Place the LED lamp directly on top of the charging induction plate so that there is a secure fit - you should see a red (for charging) or blue light (fully charged) omitted from the LED lamp.