Product Manual

20 •

4.4 Configuring the device

Sections 4.5 to 4.6 show the data transmission options provided by the

device. Your administrator or hospital technician will decide which data con-

nection types to set up for your device. Additional configuration options can

be found in the administrator manual on the “User Documentation” DVD sup-

plied. If you have any requests for changes, please contact your administrator

or hospital technician.

NOTICE!

Loss of data

Incorrect installation or incorrect changes to the installation can lead

to loss of data and, as a result, to misdiagnoses.

► Make sure the installation or changes to the installation are carried

out by an experienced administrator or hospital technician.

4.5 Operating the device in a PC network

The device does not have “on-board” patient and user management. If you

wish to manage seca patient files and user accounts, the device must be

connected to a PC on which the

seca 115 PC software is installed. You have

the following connection options:

• network connection via

seca 360° wireless network or Ethernet

• indirect connection via USB memory stick

Connecting the network via

Ethernet or seca 360° wireless

network

If the device is connected via seca 360° wireless network or Ethernet to a PC

on which the

seca 115 PC software is installed, you can directly access seca

patient files of the PC software and transmit newly-created seca patient files

directly to the PC software.

NOTE:

• Information on creating and saving seca patient files can be found in

the section entitled “Assigning a measurement to a patient file” from

page 36.

• Follow the instructions for use for doctors and assistants for the

seca 115 PC software. If you have any queries regarding data con-

nections, contact your administrator.

seca 115