Product Manual

36 •
NOTICE!
Loss of data
If there is no new entry for approx. 5 minutes, the current measure-
ment is discarded. The complete measuring procedure will have to be
repeated.
Printing partial results You can print out the measured results so far. Proceed as described in the
section entitled “Printing results report” on page 44.
5.4 Assigning a measurement to a patient file
Checking data connection ► Ensure that you can access a seca patient database in one of the
following ways:
– the PC with the
seca 115 PC software is switched on and connected
to the device via the
seca 360° wireless network or Ethernet. The
corresponding data connection symbol is white.
– the USB memory stick with the seca patient database is connected
to the USB interface of the touchscreen display. The corresponding
data connection symbol is white.
NOTE:
• If you have connected a USB memory stick containing a seca
patient database to the device, you will not be able to access the
seca 360° patient database of the seca 115 PC software via Ethernet
or seca wireless network.
• If you are uncertain as to how a seca patient database can be
accessed, contact your administrator or hospital technician.
Logging on to a seca patient
database
If you wish to search for or create seca patient files for the first time after
switching on the device, the device will require you to authenticate yourself
using your user PIN. For this purpose, proceed as outlined below.
1. Enter your user PIN using the numerical keypad.
NOTE:
If you do not have your user PIN to hand, or if you have questions
regarding access rights, contact your administrator or hospital
technician.
2. Press the Enter key on the numerical keypad.
The entry is accepted.
The device now accesses the seca patient database.
The login symbol is white. You are logged in to the seca patient database.