Product Manual

Operation • 39
English
NOTICE!
Loss of data
The measurement has now been assigned to a seca patient file, but
has not yet been saved. If there is no new entry for approx. 5 minutes,
the device switches to standby. The seca patient file is no longer avail-
able on the device. The current measurement is discarded. The com-
plete process will have to be repeated.
► Save the measurement as described in the section entitled “Closing
the measuring procedure” from page 43.
Providing a seca patient file from
the PC software
As an alternative to searching directly on the device, you can also send a
seca patient file to the device from the seca 115 PC software.
NOTE:
This function is only available if you have an Ethernet network
connection available.
1. Perform the measurements as described in sections “Determining weight
and height” from page 27 and “Performing a bioimpedance measure-
ment” from page 31.
2. Press the
patient tab on the device.
3. Start the
seca 115 PC software.
4. Perform the following steps in the
seca 115 PC software:
– select seca patient file
–click on
send to mBCA
– select the seca mBCA to which the seca patient file is to be sent
–click
send patient file
The seca patient file is transmitted to the seca mBCA by the PC software
and appears in the
patient tab.
5. Ensure that the correct seca patient file is displayed.
6. Press the
confirm button on the device.
The name of the patient appears in the header of the touchscreen display.
The measurement is assigned to the seca patient file.
NOTICE!
Loss of data
The measurement has now been assigned to a seca patient file, but
has not yet been saved. If there is no new entry for approx. 5 minutes,
the device switches to standby. The seca patient file is no longer avail-
able on the device. The current measurement is discarded. The com-
plete process will have to be repeated.
► Save the measurement as described in the section entitled “Closing
the measuring procedure” from page 43.