Product Manual

Operation • 43
English
The drop-down menu opens.
5. Press the evaluation module you wish to view.
5.6 Closing the measuring procedure
Saving the measured results 1. Ensure that you can access a seca patient database in one of the
following ways:
– the PC with the
seca 115 PC software is switched on and connected
to the device via the
seca 360° wireless network or Ethernet. The
corresponding data connection symbol is white.
– the USB memory stick with the seca patient database is connected
to the USB interface of the touchscreen display. The corresponding
data connection symbol is white.
NOTE:
• If you have connected a USB memory stick to the device, you will
not be able access the data of the
seca 115 PC software via
Ethernet or the
seca 360° wireless network.
• If you are uncertain as to how a seca patient database can be
accessed, contact your administrator or hospital technician.
2. Press the switch menu button.
The secondary menu appears.
3. Press the save button.
– If you are logged in to a seca patient database, the measured results
will be saved. The corresponding data connection symbol is red.
– If you are not logged in to a seca patient database, the dialog win-
dow for user PIN entry appears. Enter your user PIN as described in
the section entitled “Logging on to a seca patient database” on
page 36. The measured results are saved. The corresponding data
connection symbol is red.
4. Log off from the seca patient database as described in the section
entitled “Logging off from a seca patient database” on page 44.
The measuring procedure is complete.