Product Manual

62 •
Creating default module selection In order to create an in-house default module selection, proceed as outlined
below.
1. Press the
switch menu button.
The secondary menu is displayed.
2. Press the
settings button.
The
User menu appears.
3. Press the drop-down menu.
The drop-down menu opens.
4. Press the
Default module selection menu element.
The current module selection is displayed.
The Raw data for impedance evaluation module is deactivated at the fac-
tory. Activation/deactivation of the Raw data for impedance, Energy and
Health risk evaluation modules affects bioimpedance analysis as outlined
in the table below.
5. Press all modules you wish to deactivate.
The tick in the checkbox is no longer displayed.
NOTE:
Press on a module again to reactivate it.
Evaluation
module
Setting
• = activated,
- = deactivated
Effect
a
a.Interrogation of PAL and WC in the Module-specific entries dialog window.
Dialog window is skipped if the Energy
and Health risk evaluation modules
are deactivated.
Energy
• Physical activity level (PAL) is interrogated
-
No interrogation of physical activity level
(PAL)
Health risk
• Waist circumference (WC) is interrogated
-
No interrogation of waist circumference
(WC)
Raw data for
impedance
- Measurement duration: 20 seconds
•
Measurement duration: 90 seconds
Raw data for impedance available for
19 frequencies