Product Manual

Configuring the device • 63
English
6. Press the apply button.
The module selection is saved and available from the next bioimpedance
analysis.
NOTE:
To exit the dialog window without saving, press the
cancel button or
the most recently active tab (red, in this case:
bia). The most recently
active tab is active again.
7.2 Saving settings
Applying settings 1. Press the apply button.
The
Save operation successful dialog window appears.
2. Press the
continue button.
The
settings\User menu appears in the display again.
You can implement additional settings in the
settings\User menu or exit
the menu as described in the section entitled “Exiting Settings\user menu”
on page 63.
Exiting Settings\user menu 1. Press the Finish button.
The
Unsaved changes dialog window appears.
2. Press the desired button:
–
Yes: the changes are saved. The most recently active tab is active
again. The device is ready for measurement.
–
No: the changes are not saved. The most recently active tab is
active again. The device is ready for measurement.