Product Manual

64 •
8. HYGIENE TREATMENT
WARNING!
Electric shock
The device is not de-energized when the on/off button is pressed and
the display goes out. Use of fluids on the device may cause electric
shock.
► Before each hygiene treatment, ensure that the device is switched
off.
► Disconnect the power supply before each hygiene treatment.
► Ensure that no fluids penetrate the device.
CAUTION!
Damage to device
Unsuitable cleaning agents and disinfectants may damage the
sensitive surfaces of the device.
► Use only chlorine and alcohol-free disinfectants explicitly suitable for
acrylic sheet and other sensitive surfaces (active ingredient:
quaternary ammonium compounds, for example).
► Do not use aggressive or abrasive cleaning agents.
► Do not use organic solvents (e.g. white spirit or petroleum spirit).
8.1 Cleaning
► Clean the surfaces of the device with a soft cloth as required, dipped in a
mild soap solution if necessary.
8.2 Disinfecting
1. Check that your disinfectant is suitable for sensitive surfaces and acrylic
sheet.
2. Follow the instructions on the disinfectant.
3. Disinfect the device:
– Moisten a soft cloth with disinfectant and wipe down the device
– Comply with the intervals: see table
8.3 Sterilizing
The device may not be sterilized.
Interval Component
Before each
measurement
• weighing platform and foot electrodes
• standing aid and pair of hand electrodes
After every
measurement
• weighing platform and foot electrodes
• standing aid and pair of hand electrodes
As required
• touchscreen display
• Controls