User's Manual

Doc. No.: A20440690 Rev.: ECO: 12027 Date: 8/17/16
11
Figure 2 - Tag Strap
3. Fold the snap receptacle down to accept the snap post and press the two together firmly until it snaps
securely.
4. Trim off excess material
Adding a Tag to ENvisionIT
1. Log in to ENvisionIT Software with your respective User Name and Password.
2. Click on the MENU tab on the left side of the window.
3. Click on “TAG LIST” and fill out all of the required information following the hospital policy and procedure.
Figure 3 - Selecting the Tag list