Instructions / Assembly

6
1. Power LED (flashes on/off whenever a door or window is opened or closed).
2. Emitting sensor (normally mounted on the door or window frame).
3. Magnetic piece (normally mounted on the window or door).
4. Battery compartment (make sure all plastic is removed from the battery prior to inserting it, 1x AA battery).
5. Pair button (used to add the sensor to your alarm host).
NOTE: Please make sure the gaps between the magnetic and the emitting of the door/window sensor are less
than 1/4 of an inch when installing.
1. Power LED (flashes on/off whenever movement is detected).
2. Sensor window (110 degrees, up to 30ft detection range).
3. Philips head screw (used to replace batteries when needed).
4. Pair button (used to add the sensor to your alarm host).
5. Motion sensor.
6. Battery compartment (make sure all plastic is removed from batteries prior to inserting them, 2x AAA batteries).
7. Bracket slot.
MOTION SENSOR (SM-003P)
INDOOR SIREN (SM-005SR)