Instructions / Assembly

7
1. Strobe LED’s (flashes whenever the alarm is tripped).
2. Tamper switch (sets the siren off whenever it is lifted from its fixed location).
3. Power socket and cable management slot.
4. Pair button (used to add the siren to your alarm host).
5. Mounting holes (for accurate positioning please use the anchor guidance card).
NOTE: The indoor siren contain internal backup battery slots for 3 AA batteries in case of power outage (Batteries
not included).
1. Power LED (flashes on/off whenever a button is pressed).
2. Arm (used to arm the host).
3. Disarm (used to disarm the host).
4. Pair button (used to add the remote to your alarm host).
5. Panic button (used to trip the alarm in the event of an emergency).
6. Key Ring.
NOTE: Please pop open the top and bottom panel of the remote control to remove the clear plastic tab to activate
the battery before use.
REMOTE CONTROL (SM-007R)