Instructions / Assembly

MOTION SENSOR (SM-003P)

Using a Philips screw driver, remove the screw located at the top of motion sensor, detach the front cover and Insert

the 2 AAA batteries that were provided (Make sure the + and – polarities are correct). Once the batteries have

been inserted the red LED should start to ﬂash or stay solid indicating that it is now operable. Re-attach the front

cover and insert the mounting bracket into the bracket slots located on the back of the sensor.

INDOOR SIREN (SM-005SR)

Insert the female end of the sirens AC adapter into the DC in port located behind the siren and secure the siren to

your wall using the screws provided. Once the siren has been mounted, plug the AC adapter into a wall outlet.

Please note that the siren is equipped with a tamper proof switch (located on the back) that will trigger the siren to

go off whenever the siren is lifted off the wall.

INSIDE VIEW OF SENSOR