Instructions / Assembly
10
REMOTE CONTROL (SM-007R)
Please pop open the top and back panels of the remote control to remove the clear plastic battery protector before
use (please do this by hand only, do not use sharp utensil or screw driver). Once removed, place the top and
back panels back together and test the remote by pressing any button. The red LED should flash with each press.
1. Open the App Store (iOS) or Google Play (Android) on your mobile device. Then search for and install the
“HomeBot” application. Once installed, tap on the “HomeBot” icon (Fig 2.1), tap the “+” icon located at the top
right corner of the screen (Fig 2.2) and then select the “Search in LAN” option (Fig 2.3).
NOTE: Make sure your Smartphone or tablet is connected to the same Wi-Fi network as the one you want to put
the alarm host on.
STEP 2 SMARTPHONE SETUP Smart Cong Method
Fig 2.1 Fig 2.2 Fig 2.3