Instructions / Assembly

2. Now select the Smart Cong option (Fig 2.4) to begin the adding process. Turn your alarm host upside down

then “Press and Hold” the pair button (Fig 2.5) until the pair LED located on the top of the host begins to ﬂash

rapidly and then press next on the Smartphone prompt. Input the Wi-Fi password of the network that you are

currently connected too (Fig 2.6) and press next. This will allow the app to smart conﬁgure the camera using

your current wireless network.

3. Once your alarm host has been detected by the app the pair LED on the host will go out indicating that it was

found. You will now be given the opportunity to name the alarm host (Fig 2.7) such as home, work, etc, prior to

saving it. Now input the default host password 123456 and, tap save (Fig 2.7) to complete the setup. Your

device will now be displayed as the start screen whenever the app is launched (Fig 2.8)

Fig 2.4

Fig 2.7 Fig 2.8

Fig 2.5 Fig 2.6