Instructions / Assembly

12
Adding Devices and Cameras
By default right out the retail box, all the wireless devices are already paired to the alarm host. In situation where
they are not paired, the HOMEBOT Smartphone app has a built in “user friendly” step-by-step interactive guide
that you can follow when adding each device.
• Make sure you have the app installed on your Smartphone or tablet and that you have successfully added the
alarm host to the app.
• Make sure the device(s) being added is no more than 2 feet from the host during the pairing process. You can
place them in the desired location when completed.
When you are ready launch the HOMEBOT app and set it to the control center as shown below.
DOOR/WINDOW SENSOR (SM-002M)
1. Using a small flat head screw driver, gently pry open the back cover from the larger of the two pieces and Insert
the AA battery provided. Make sure you remove any plastic wrap covering the battery prior to inserting it and
leave the top cover off. You can reattach the two pieces as soon as you are done pairing the sensor to the host.