Instructions / Assembly

13
4. Once the sensor has been successfully added to the host, re-attach the back cover and test the sensor by sepa-
rating the small magnetic piece from the flat side of the larger piece. You should get a flashing red light every time
the two pieces are separated.
2. On the control center, tap on the door/window sensor icon and then tap on the + (add) symbol to begin
adding the new sensor.
3. “Press and Hold” the pair button on the door/widow sensor being added until the sensors LED begins to
flash rapidly and then press next on the Smartphone prompt. Once your sensor has been detected by the alarm
host you will be given the opportunity to name the device prior to saving it.