Instructions / Assembly

4. Once the siren has been successfully added to the host you may unplug the AC adapter and mount the siren to

your wall using the screws provided. Once the siren has been mounted, plug the AC adapter into a wall outlet.

Please note that the siren is equipped with a tamper proof switch (located on the back) that will trigger the siren to

go off whenever the siren is lifted off the wall.

REMOTE CONTROL (SM-007R)

1. Please pop open the top and back panels of the remote control to remove the clear plastic battery protector be-

fore use (please do this by hand only, do not use sharp utensil or screw driver). Once removed put the two panels

back together, test the remote by pressing any button. The red LED should ﬂash with each press.

2. On the control center, tap on the key remote icon and then tap on the + (add) symbol to begin adding the

new remote.

PAIR BUTTON