Instructions / Assembly

22
3. “Press and Hold” the pair button on the socket being added until the LED begins to flash rapidly and then
press next on the Smartphone prompt. Once your wall socket has been detected by the alarm host you will be
given the opportunity to name the device prior to saving it.
NOTE: Please make sure the wall socket is “ON” prior to pressing and holding the pair button or the host will fail
to pair it.
4. Once the wall socket has been successfully added to the host, you can plug-in the device (lamp, radio, etc) you
wish to control remotely “on/off” using your Smartphone or tablet.
NOTE: The wall socket will be set to the off position when it is first paired to the receiver. You can simply tap on
the on/off switched located to the right of the device label to turn it off/on.