Instructions / Assembly

SEARCH IN LAN

The Search in LAN options are speciﬁcally designed to perform searches over your Local Area Network quickly

and efﬁciently while being easy enough to use that it doesn’t confuse you with hundreds of options.

SMART CONFIG

To add your alarm host to the HomeBot app using the Smart Conﬁg method, make sure your new alarm host in

powered on and follow the steps below.

1. Tap on the Smart Cong option (Fig 1) to begin the adding process. Turn your alarm host upside down

then “Press and Hold” the pair button (Fig 2) until the pair LED located on the top of the host begins to ﬂash

rapidly and then press next on the Smartphone prompt. Input the Wi-Fi password of the network that you are

currently connected too (Fig 3) and press next. This will allow the app to smart conﬁgure the camera using

your current wireless network.

1. Search in LAN

2. QR Scan

3. Manual Input

• Smart Cong

• Broadcast in LAN

• AP Mode